The Porch Swing is enjoying a surge in popularity thanks to the latest Home & Garden trend towards building "Garden Rooms". Patio Furniture Retailers have responded by flooding the market with so many options that making a choice can be a daunting task. Here are some factors that you should consider to help you make the best Porch Swing choice for you: Porch Swings are now made from a wide range of building materials. The most common are wood and wicker. Popular woods used are cedar, teak, pine, maple, and oak. The materials vary greatly in terms of strenth and durability. While Oak is the strongest, it also tend to be very heavy. Cedar offers the greatest strength to lightest weight ratio. The wood is very light and has 80% the strength of oak. Cedar also has natural properties that enable the wood to resist rot and decay. In addition, it won't bow or sag, crack or chip making it one of Outdoor Furniture's most desired building materials. Pine is lightweight and relatively inexpensive but is soft and dents and cracks easily. The durability of wicker varies depending on the materials used to make the wicker. Porch Swing physical features like seat depth, angle of the back and space between the slats, length of the seat, and joint construction can vary widely. The depth of the seat is one feature that is very important. Seat depth can range from 18 to 36 Inches. There is no one correct depth. It's a personal choice based on comfort. For maximal comfort, the back of the Swing should be slightly tilted. And there should be some space between the slats to allow air to circulate. Swings can generally hold one to three people depending on the length of the seat. But keep in mind that the longer the seat the heavier the supports that will be required. Generally, a Porch Swing that seats two comfortably is recommended. Finally, the functional nature of Porch Swings requires that the joints be screwed or bolted together. Joints that are nailed together are not recommended as a Porch Swing is a functional peice of and the nails will come loose with use. Another criterium to consider is whether to buy a finished or unfinished Porch Swing. Porch Swings are now available in a variety of finishes. Some are stained, others painted in colors ranging from white to a rainbow of multiple colors. Many Porch Swings are also unfinished. The unfinished Porch Swings provide the most options later and some can be left to age naturally without finishing. Unfinished Cedar, for example, is "Outdoor reaady". No finishing is required. An unfinshed Patio Furniture Porch Swing also leaves lots of "dress up" options. While it might be difficult to find cushions to match muti-colored Porch Swings, by starting with an unfinished Outdoor Furniture swing, you could pick the stain or paint to match the cushion! Installion is another important consideration. If you have a covered Porch with exposed joists, your installation job is automatically made easier. However, your options re: length and weight of the Porch Swing may be limited. If you intend on building your own Porch Swing support for the garden or an uncovered porch, more options are open to you as you can build the support according to the weight and length of the Porch Swing. By considering the building material, physical features, the finish, and your particular installation requirements in advance, your task of choosing the Porch Swing that is best for you will be much easier. And you'll be enjoying your Porch Swing that much faster with fewer hastles! |
